![]() But selecting from SMBIOS the window obviously shows nothing because there's no info in the config file. Now in Clover Configurator I look at RTVariables and select "from system" and there is information there. Do I need to put information in my config file under SMBIOS beyond the System Definition? I don't remember ever doing that manually in other installs. One thing posted in the other thread, that I kind of hijacked, was that my config file only has System Definition as 14,2 in SMBIOS, but nothing else. So I decided to try and boot the system by removing the USB. Say you want to compare /Volumes/EFI/EFI/CLOVER/ist for both EFIs, you double click the first, it opens ok in BBEdit (for example), then you double click the other one, it won't open because BBEdit sees it as residing on the same partition.Ĭlover installers or Multibeast don't have that issue because they consider the drives where the EFI is, so no confusion for them.Īs for the boot file, I wouldn't bother copying it, but instead I'd install the same Clover on USB key and SSD over the existing ones, just to be sure: the standalone version is ok but Multibeast too, they should both respect what's already in your EFI folder, including your ist. So I must amend what I wrote when I wrote "The system considers all mounted EFI partitions as the same", the Finder has no problem with them, just third party apps. They will see them as the same because of their identical UUID (see that thread: )īut if you have one EFI on the left window and the other on the right and copy something from one to the other, it works as intended, it's just that you have to be sure you selected the good one. When I click on the first or the second, there's no issue, the Finder shows them distinctively, the problems arise only when using an app such as BBEdit, Clover Configurator, etc. ![]() Is there any screen shots, files, logs anyone may need to help me? Please let me know and I will post them quickly. I'm going nuts trying to figure this out. It seems copying the EFI from USB to SSD has helped many get around this, but alas, not me. Why oh why is my SSD not showing up in Clover boot screen. I'm completely stuck.ĮFI/Clover/drivers/BIOS the ApfsDriverLoader.efi is there. Not sure if I should have, so I left that alone. I DID NOT copy the "boot" file on the root of EFI from USB to SSD. Used Clover Configurator to mount EFI on USB and on SSD.ĭeleted EFI folder on SSD and copied USB/EFI to SSD/EFI. Reboot with USB as boot drive in BIOS (F12 menu) and select APFS Mojave (SSD) at Clover boot screen, boots fine. I can boot to desktop using USB, no issue.Ĭhange boot disk to SSD in BIOS during post, and I get to Clover screen but NO SSD to boot from. I installed a vanilla Mojave on a new SSD using UniBeast. Hardware profile is correct, however, only using IGPU (HD3000 - Sandy Bridge) for now since I could only boot with -x with RX580 installed. Building a CustoMac Hackintosh: Buyer's Guide
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |